OMEGA – OME-DB-24SSR and OME-DB-24SSR/D

///OMEGA – OME-DB-24SSR and OME-DB-24SSR/D
  • omega-ome-db-24ssr-and-ome-db-24ssr-d

OMEGA – OME-DB-24SSR and OME-DB-24SSR/D

  • 24 SSR (AC)
  • One OPTO-22 Compatible Connector, One 37-Pin D-Sub Connector and One 20-Pin Connector
  • Connects Directly to OME-PIO-D144
  • LED ’s Indicate Relay Status
  • Screw Terminals for Easy Field Wiring
  • 2500 V Optical Isolation
Categories: ,

Product Description

The OME-DB-24SSR includes 24 normally open, or Form A, solid-state relays. The board interfaces to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The user can use the OME-DB-24SSR to switch high voltage loads up to 240 Vac and up to 4 A. The relay is energized by applying a 5 V signal to the appropriate relay channel on the 50-pin OPTO-22 compatible connector or 37-pin D-Sub connector. Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated. Because there is a D-Sub 37-pin connector on the board, the user may use it to interface to any TTL output board.

Specifications
SOLID STATE RELAY (SSR)
Load Voltage:
50 to 250 Vac

Repetitive Peak Off Voltage: 600 V
Surge Current: 50 A
Maximum Load Current: 4 A
Maximum “Off-State” Leakage
Current: 5 mA

Operating Time Maximum: 1/2
cycle of voltage sine wave: 1 ms
Power Consumption: +5 [email protected] A max
Dimensions: 130 H x 220 mm W (5.1 x 8.7″)
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -20 to 70°C (-4 to 158°F)
Humidity: 5 to 90% RH non-condensing

Reviews

There are no reviews yet.

Be the first to review “OMEGA – OME-DB-24SSR and OME-DB-24SSR/D”

Your email address will not be published. Required fields are marked *