OMEGA – FP-6500 Series

///OMEGA – FP-6500 Series
  • omega-fp-6500-series

OMEGA – FP-6500 Series

  • Available in 316 Stainless Steel or Brass
  • Installs in a Wide Range of Pipe Sizes From 3″ to 40″
  • Excellent Low-Flow Performance
  • Special Fittings Not Required
  • Hot-Tap Versions Available
Categories: ,

Product Description

Ruby bearings and a non-drag pick-off give these adjustable insertion flow sensors the widest flow range of any of the paddlewheel types. A Hall-effect device detects the passage of miniature magnets in the six rotor blades. The resulting square-wave signal can be sent hundreds of feet without a transmitter, over unshield cable. This signal can be connected directly to many PLCs and other controls without additional electronics.

A depth adjustment system allows two basic sizes to cover pipe sizes from 7.62 to 102 cm (3 to 40″).

Probe Body:
Brass or 316 SS
Rotor: PVDF
Shaft: Nickel-bound Tungsten Carbide standard, ceramic optional
Bearings: FP6501/FP6502: Ruby ring, ruby end stone, set in PVDF bearing holder
FP6511/FP6512: Bronze Ball Valves standard, 316SS optional
Power: 5 to 24 Vdc, 1.5 mA
Signal: Square wave, 11 Hz/fps (approx.), current sinking output, 20 mA maximum, NPN (Hall Effect)
Cable: #22 AWG 3-conductor, 6 m (18′) standard; 650 m (2000′) max
Accuracy: ±1.5% of full range
Range: 0.3 to 30 fps
Maximum Working Pressure: 14 bar (200 psi) at 24°C (75°F)
Maximum Temperature: 93°C (200°F) at 0 psig
Shipping Weight:
FP6501: 1.8 kg (4 lb)
FP6502: 2.3 kg (5 lb)
FP6511: 5.9 kg (13 lb)
FP6512: 6.8 kg (15 lb)
Pipe Size Range:
FP6501/FP6511: 7.62 to 31 cm (3 to 12″)
FP6502/FP6512: 31 to 102 cm (12 to 40″)
Fitting Size:
FP6501/6502: 1½ MNPT
FP6511/6512: 2 MNPT


There are no reviews yet.

Be the first to review “OMEGA – FP-6500 Series”

Your email address will not be published. Required fields are marked *